The Racing F3 board is a tested and tried replica of the SPRF3 board. After almost 12months of use we have found no issues with this board.
• Beta Flight and Cleanflight support
• Next-generation STM32 F3 processor and faster ARM-Cortex M4 core
• Loop times up to ~2x as fast as previous-generation STM32F1 based boards
• On-board high-capacity black box flight log recorder - optimize your tuning and see the results of your setup without guesswork
• No compromise I/O. Use all the features all the time; e.g. Connect your OSD + SmartPort + SBus + GPS + LED Strip + Battery Monitoring + Sonar + 8 motors - all at the same time!
• 16 PWM I/O lines for ESCs, Servos and legacy receivers. 8 available on standard pin headers. 8 via side mounted connectors.
• Full support for OneShot ESCs for easy PID tuning and a sharper response.
• Supports SBus, SumH, SumD, Spektrum1024/2048, XBus, PPM, PWM receivers. No external inverters required (built-in)
• Dedicated output for programmable LEDs - great for orientation, racing and night flying.
• Dedicated I2C port for connection of OLED display without needing flight battery.
• Battery monitoring ports for voltage and current
• Built in sensors for altitude and direction. Barometer mounted on the bottom of the board for easy wind isolation
• Buzzer port for audible warnings and notifications
• Symmetrical design for a super tidy wiring
• Wire up using pin headers, JST-SH sockets or solder pads. Use either right-angled or straight pin-headers
• Stackable design - perfect for integrating with OSDs and power distribution boards
• Configuration of the flight controller via a cross-platform GUI (Windows/OSX/Linux)
• Supports a variety of aircraft, tricopters, quadcopters, hexacopters, octocopters, planes and more
Size: 36x36mm board with 30.5mm mounting holes
Processor: STM32F303 CPU with FPU 256kb Flash
Memory: 8MB (64Mbit) High-Capacity Flash
Magnetometer (Compass Sensor): HMC5883
Connector: Micro USB
Combine the latest FC tech with a high-current capable PDB and you get DTFc, the...
DYS F4 Flight Controller Specifications: Size: L42 * W36mm Hole distance: 30.5*30.5mm Net weight: 11.2g...
Fruity Naze32 rev6 Acro At the heart of the Fruity Naze32 is a 32bit ST...