The Mini POWER HUB been engineered to provide the highest possible performance and reliability in a 36*36mm & 4 layers PCB.
The HUB distributes power from a battery pack to 4 ESCs.as well as provding synchronised & regulated DC outputs for powering cameras, servos, video transmitter, LEDs, ect. Batteries may range from 3S to 6S Lipo.
The HUB also features
convenient solder bridge of various voltage for camera & video TX.
Brand name: DALRC
Item name: Power Distribution Board
input voltage range (2s - 6s operation): 7 to 26V DC
Regulated 5V and 12V outputs
LED power indicators (5V & 12V outputs)
4 ESC outputs.
continuous current: 50A per output current (5 seconds/minute): 200A per output.
BEC 5V output:
Designed for RC receivers, flight controllers, OSD, and Servos
DC/DC synchronous buck regulator, Efficiency is up to 95%
Voltage: 5.0 +/0.1VDC
Continuous current: 3 Amps Short circuit tolerant(10 seconds/minute)
LED (indicates voltage is in regulation)
BEC 12V output:
The battery should be 4S6S Lipo
Standard output designed to power cameras and video transmitters,etc.
Voltage: 12.0 +/0.2VDC
Continuous current: 2 Amps (Max.3A 10s/minute) Short circuit tolerant(10 seconds/minute)
LED(indicates voltage is in regulation)
CAM & VTX voltage bridge
3S operation. choose "VCC" for 12V camera & 12V VTX, VCC=Battery voltage.
46S operation, choose "5" for 5V camera
Video pass through from the "CAM" pad to the "VTX" pad
Mounting holes 30.5mm square spacing
3oz coppter & 4layers
ESC & Battery solder tabs in pairs
Solder Bridges of various voltage for camera & VTX
5V & 12V Output LED indicator & Short circuit tolerant
This type of (buck) step-down voltage regulator is able to take 2S to 5S and...
Replacement PDB for your Armadillo and Armadillo PUP. This one is the Replacement of the Standard...
F1-5/6 INTEGRATED POWER BOARD Integrated power Distribution Board for F1-5 and F1-6 quads